HWS200 push model electric handheld concrete scarifier
HWS200 electric handheld concrete floor scarifier machine(concrete planer) is a practical tool for roughening, scarifying, texturing and planning concrete, asphalt, and epoxy resin floor. It is excellent for removing traffic line, road marking and thermoplastics, adhesives and coating; therefore it has lots of applications: concrete and asphalt on high-speed roadway, airport runway, civil construction, floor preparation. HONWAY has a series of scarifying machine, which should be chosen according to size of concrete slab, the depth of planning, and etc.
The machine’s drum with TCT cutters rotates forward in very high speed; which swings the group of cutters crash the floor, therefore the carbide tungsten tips on the cutters mill, plan, scarifying concrete, asphalt, and epoxy resin on the floor surface.
Removing traffic line and coatings;
Small, narrow areas or edges;
Floor preparation or cleaning;
Creating nonslip surfaces.
HWS200 push model handheld concrete scarifier rotates with blunt or flat TCT cutter, at high speed, to chip away the surface of concrete, asphalt, and epoxy. Quick-change drum design allows you change drum and cutter in minutes.
HWS200 push model electric handheld concrete scarifier machine key features:
1, good heart of the machine: Honda (made in Honda factory in China, not copy one) , gasoline, 4 stroke. Honda is well known in the world as the gasoline engine, and its spare parts are very easy to purchase locally. Pure copper electrical motor, 380v, three phrase, ), built-in overload protection, leakage protection, phase loss protection.
2, the drum for scarifying: the drum work craft is extremely important for the machine, as it affords the high speed or rotation and strike from the floor. HONWAY concrete floor scarifer drum is specially manufactured, heat treated, and welded. Since 2017, HONWAY concrete floor scarifier has not got one case of complaint about drum.
3, the shaft of drum: totally 6 pcs of shafts for every drum. hard chromium, and its hardness is adjusted for the friction of the drum.
4, tungsten carbide cutters of drum, the base material is 45CrMo. Tungsten carbide and cobalt metal is from the big factories, which make sure the hardness.
5, ball Bearing and bearing base for the concrete scarifier : the ball bearing is purchased and used among the customers for many years. Bearing base is specially manufactured, which affords the high rotation of the drum and overload work.
6, the scarifying depth can be adjusted by the lead screws.
7, the brushes of four sides and vacuum port: the brushes prevents dust enter into the working site, good quality, no hair loss.
Why the bearing of concrete scarifier needs to grease within a few hours?
The working site for scarifier is very bad, even if with the vacuum. Unlike the floor grinding machine, the bearing of the scarifier machine is exposed to abundant dust. Grease could prevent dust and lubricate. The broken of bearing, in many cases, is not caused by the quality of bearing, but the usage habit. Grease must be given. Every machine has a grease gun when it leaves factory.
Quick-change drum of the concrete scarifier:
It only takes a few minutes to change the drum, so easy!!!
First step: loose the screws and take away the belt cover;
Second step: take out the screws;
Third step: knock the big shaft and make it loose;
Four step: take out the shaft and change the concrete scarifer drum.
see the blow pictures:
|Drum rotation||Down cut(clockwise)||Down cut(clockwise)|
|Drum of shaft||6pcs||6pcs|
|Drum of cutter||78pcs||78pcs|
|Walking way||Push model||Push model|
Packing and Shipping:
1. The lead time is about 7-15 days (it depends, sometimes the cargo is in stock);
2. The spare parts of machine is usually in stock.
3. By sea shipping, the sea time is about 7-35 day; by air shipping, 3-10 days; by Express, 3-7 days.
Before sales service:
Answer the questions and suggest according to floor condition and floor finish.
During sales service:
Check and report the delivery process within a few days, until the customer get the cargo.
After sales service:
Respond to problem within 1 hour (except 0:00-8:00 China time), solve the problem 4 hours, delivery of spare parts 24 hours.
Supply of spare parts:
All the time, stock, can be sent within 24 hours.