China Factory manufacture 110/220/380V concrete floor grinder

mailwhatsapp

Concrete Floor Grinding Pad

Key Features

The quality is guaranteed by the combination of superior diamond and extremely durable matrix;

Good result on most types of concrete from soft to very hard;

The good output and performance match perfectly;

Removes stock quickly and save your labor;

Compared with the normal grinding tool, sharpness, water-resistant, work efficiency increased by 30%;

Fast speed, less chipping.

Product Details technical specification Packaging & Delivery FAQ

HONWAY’s range of diamond grinding and polishing tools is the result of innovative development and a commitment to providing the best possible options for the professional grinding contractor for different situation and application. From the removal of the rough coatings through to high gloss premium polishing.

Application:

The diamond pads are widely use in concrete or terrazzo floor surface preparation, removing the floor coatings, grind the uneven floor.

How to choose the suitable grinding pads for your floor?

The concrete will keep the diamond sharp and exposed if the bond is correct for the concrete, and the diamond tools also have best removal rate and the longest service life;

Soft floors

Soft concrete causes more wears on the tools; so check the tools after 10 mins;

The scope of concrete hardness is C15-C25;

Medium-hard floors

Normal building concrete;the scope of concrete hardness is C25-C50;

Hard floors

Usually refers to steel toweled floors, hardened concrete floor, certain types of cement. This includes granite. The floors usually require ‘soft’ segments. The scope of concrete hardness is C50-C80;

General introduction of concrete floor diamond grinding polishing pad, diamond abrasives usually consist of 2 components.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Diamond powder (also known as diamond crystals or grit): By changing the size of the diamond powder or grit, we can change how coarse or fine the scratches which are left behind from the grinding process. A binding agent (metal or resin): Diamond powder is mixed in either a metal or resin binding agent. When mixed with metal binding agent, the finished product is metal bond; when mixed with resin binding agent, the finished product is resin bond/pad. By changing the hardness of the binding agent, we can change how fast or slow the diamond abrasive will wear.

General principle of diamond concrete floor grinding polishing pads
concrete floor of before use grinding pads
Changing the size of the diamond grit to a smaller particle / grit size will affect the performance of the diamond tool in the following ways: create a finer scratch pattern, increase life of diamond tool.
The opposite will occur when changing to a large particle / grit size. Binding agent: Increasing hardness of bond will: create a finer scratch pattern, increase life of diamond tool, decrease production rate. The opposite will occur when making the metal or resin bond softer.
How to choose the? suitable grinding pads for your floor!
Grinding floor
applications , metal bond, grit size
Diamond floor pads for HONWAY grinding machine
Screws and magnet system for diamond tools: recommended rpm: 550-650, HONWAY metal bond tools feature fast and aggressive cutting and long tool life, the metal bond are designed specifically for the different types of concrete hardness. To select the correct bond for a specific floor, we recommend using the Mohs scratch pen firstly to determine the hardness of the concrete. The rectangle bond is 40*12*20 mm and the button bond is 25*12 mm. Dry or wet grinding are both OK!
Black bond series for soft concrete, typically under 2500 psi, Mohs scale 2-3, red bond series for medium concrete, between 2500 and 4000 psi, Mohs scale 3-5, blue bond series for hard concrete, between 4000 and 5500 psi, Mohs scale 5-7, silver bond series for extra hard concrete, over 5500 psi, Mohs scale 7-8.
The concrete will keep the diamond sharp and exposed if the bond is correct for the concrete, and the diamond tools also have best removal rate and the longest service life.
diamond concrete floor grinding pads for other concrete grinding machine
Honway diamond tools are especially designed for HONWAY machines but also have a proven record of excellent performance with other floor grinders on the market. For different brand of grinding machine: HTC, LAVINA, HUSQVARNA, KLINDEX... the tool system which are popular in the market: quick change system, EZ system, Redi-lock system,Slide on system...
To water grind or to dry grind? this is a question.
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Water grinding could prolong the grinder’s life, and make the floor more smooth and fine. However, water grinding reduce the lifetime of diamond tool. Besides, it produces a lot of mud and sewage. The dry grinding is clean, convenient, and saves tools. But it produce a large amount of dust in the construction site. Therefore, in the stage of leveling and rough grinding ,it is recommended to use the wet grinding (not water grinding), which sprinkle the floor with water . Grind the floor until the water evaporate but the floor is moist. This treatment is especially suitable for very bad floor.

HONWAY G1000 PCD diamond pads

PCD is very sharp; it is designed for quick removal of coatings, such as paint, epoxy, glue from concrete floors as well as flattening bumpy concrete surface.
The special formulated grade of diamond scraper ensures maximum wear and productivity;

pcd for concrete floor grinding

Magnet and screw holding

Planetary heads rotate on a large disk, with more efficiency;

HONWAY G1100 Metal bond diamond tools

HONWAY offers a range of metal-bonded diamond tools for every application. Every diamond tool has the different bond for soft, medium and hard concrete. The concrete will keep the diamonds sharp and exposed if the bond is correct for the concrete, and the diamond tools also have best removal rate and the longest service life.
HONWAY’s tool system is QUICK ATTACK change tool system, instant and hassle-free.

concrete floor grinding pad

Magnet and screw holding

#20, #30, #60, #120, #150, #300

Soft / medium / hard bond, for hard / medium / soft concrete floor

Diamond bond: 40*12*12mm

Dry or wet grinding

HONWAY G1200 Metal bond diamond tools

Redilock diamond pad for concrete floor grinding

Redilock Slide on holding

#20, #30, #60, #120

Soft / medium / hard bond, for hard / medium / soft concrete floor

Diamond bond: 40*12*12mm

Dry or wet grinding

 

HONWAY OEM Metal bond diamond tools

lavina for concrete floor grinding

Slide on holding

#20, #30, #60, #120

Soft / medium / hard bond, for hard / medium / soft concrete floor

Diamond bond: 40*12*12mm

Dry or wet grinding

 

HONWAY G1100 Metal bond diamond tools

Item NO Grit Shape Bond Hardness Application
C1101 20# R/C Hard C25
C1102 30# R/C Hard C25
C1103 60# R/C Hard C25
C1104 80# R/C Hard C25
C1105 120# R/C Hard C25
C1106 20# R/C Medium Hard C25-C35
C1107 30# R/C Medium Hard C25-C35
C1108 60# R/C Medium Hard C25-C35
C1109 80# R/C Medium Hard C25-C35
C1110 120# R/C Medium Hard C25-C35
C1111 20# R/C Soft C40
C1112 30# R/C Soft C40
C1113 60# R/C Soft C40
C1114 80# Soft Soft C40
C1115 120# Soft Soft C40

Packing and Shipping:

 

 

 

 

 

 

 

 

 

Shipping:
1. The machinery is usually delivered by sea shipping, delivery time is 15-35 days.
2. The consumables and spare parts can be delivered by Express like DHL...Delivery time is 3-7 days.
3. The cargo also can be sent to the destination airport,which is more economic than Express, Delivery time is 3-5 days.

Q:How many sqm a set of Honway diamond grinding pads covers?
A: The life of diamond pads are determined by many factors. It is related with floor condition (bad, ok, good, smooth...) and the workers' technique (walk one time or walk 3-4 times), machine weight and performance...so the consummation of floor diamond pad is different. It is hard to give a data which covers all floors.
Under normal condition, (the concrete is medium hard, the floor condition is ok) the floor grinding pad #30 could cover about 500sqm, #120 about 600-800sqm (if the floor is good, 1000sqm); the floor polishing pads #50-#200 (to remove the floor scratches) about 400sqm, #800, about 1000-1200sqm.

This data varies, not a fix data. But we could assure that the diamond powder and martial is the best level in China.

Q:I am confused to choose the suitable Honway grinding pads for my floor.
A: Please tell us the floor condition and your requirement for floor finish, we are glad to guide you how to choose.

Q:If the diamond is easy to be exposed?
A: Firstly it depends on if you choose the right diamond grinding pads for the floor. Secondly, it depends on the machine weight and speed. Honway assures that the diamond concentration is very enough.

Q:How to check the quality before I order?
A: To be honest, it is unable. It is unable to see the quality from outside. You are suggested to order a few for test. Many customers purchase a small order again and again, to check the quality and stability of grinding pads, then build up the long cooperation with us.

Q:If you supply sample free of charge?
A: Really sorry for it, we can’t, because a set of diamond pads (6-12pcs) is a high value. We could assure the diamond powders and materials are super level in China. Thanks for your understanding.


Next:
X

Online Chat