HW-G5/G7 220/380V Square Plates Concrete Grinder
New HW-G5/G7 doesn’t leave trace on floor. The old products usually leaves trace on floor, this is because the disc plates don’t cross very well, which is not seen in coarse grinding, but in finish grinding.
HONWAY grinding and polishing machine with the square plate is a good solution to break up the deposits of grease, dirt and industrial contaminants, and to level up the uneven surface, Square plate series is suitable for preheat and level the concrete surface before epoxy coating.
HW-G5, 10hp, grinding width 600mm, 4 grinding plates, 12 pieces of diamond tool. With the magnetic disk and Velcro, It is very easy and shift to change diamond tool. The design of square disc plate could 100% touch wall and grind corner. HONWAY square plates would not leave trace on floor, as I know some machines like HW-G5 usually leaves trace on floor, which is caused by the design problem, as the disc plate can’t cross very well. HW-G5 would have not this problem.
HW-G7, 15hp, grinding with 700mm, 4 grinding plates, 12 pieces of diamond tools. HW-G7 has the quickest motor speed, from 300 to 1800rpm, so it is most powerful machine in HONWAY grinding and polishing equipment, it is good for grinding and polishing in large area, and greatly consume time and labor.
For coarse grinding, medium grinding, fine polishing, crystallizing, preparation, maintenance of all kinds of floor;
Remove painting, coating, epoxy, urethane, glue, polyurethane, mastic with PCD tools on all kinds of floor.
how to prevent the problem of oil leak?
Oil leak of the gear box is a very troublesome problem for contractors, but it is also a unavoidable problem. The rotation of gears causes high temperature and high pressure inside the gear box, the oil insides will penetrate to outside to release the pressure.
HONWAY electrical suppliers not only provides products, but also participate in the design of HONWAY electrical system, for the safety of human beings and machine.
1. The machinery is usually delivered by sea shipping, delivery time is 15-35 days.
2. The consumables and spare parts can be delivered by Express like DHL...Delivery time is 3-7 days.
3. The cargo also can be sent to the destination airport,which is more economic than Express, Delivery time is 3-5 days.
All gear box have been tested 48 hours before leaving factory.
All machine problem can be traced to individuals in the factory.
1 year warranty on the motor, invert er and gear box.
After warranty, the spare parts are sent by DHL.
Spare parts are always stocked, even if for the old models.
For over 10 sets machines, HONWAY send the technician for training.